Our machinery
Our production line runs on latest generation automated machines, chosen to give consistent quality, tight tolerances and on-time delivery for medium-batch and volume orders.
Cameras read the target marks on the panel and drill the tooling holes exactly on target, automatically.
All following processes register from these holes, so drilling, printing and profiling stay accurately aligned to your circuit, panel after panel.
Drills all component holes, vias and mounting holes directly from your drill data.
Several spindles drill several panels at once, which keeps volume orders on schedule. Automatic tool change and precise positioning give clean hole walls and accurate hole locations, so components fit perfectly on your assembly line.
Prints the circuit image and solder mask on the panel, with camera (CCD) alignment.
The cameras align every panel automatically, giving accurate registration of circuit and mask from the first panel to the last. Pads stay open and clean for soldering, with no mask on pads and no shift.
Cleaning, developing, etching and stripping of the panels, in continuous conveyorised horizontal lines.
Spray pressure, temperature and speed are controlled automatically, so track widths stay accurate and edges stay sharp across the whole panel and the whole batch.
Moving probes test every net of the board for opens and shorts, directly from the design data.
100% electrical testing of medium-batch orders and new designs before volume production, with no test jig needed, so no jig cost and no delay.
A bed-of-nails fixture tests the full panel in one stroke.
High-speed testing for volume production. Every board you receive is checked for opens and shorts, so no faulty bare board reaches your SMT line.
Cuts precise V-grooves on both sides of the panel for easy separation of the boards.
Several blades cut in one pass, with accurate groove depth and position. Panels stay rigid on your SMT line and break cleanly after assembly, without stressing components.
Cuts V-grooves that start and stop exactly where required (jump scoring), with the panel located on registration pins.
Pin registration gives accurate and precise V-cut position and depth on every panel, for boards up to 1500 mm long, such as long LED strip PCBs.
Cuts the outer profile, slots and cut-outs of the board.
Smooth edges and accurate dimensions, exactly as per your mechanical drawing, so boards fit into your enclosure without any filing or rework.
Cuts the outline of ALCCL (metal substrate) boards with a focused laser beam.
Clean, burr-free edges and accurate dimensions on metal substrate boards, with no mechanical stress on the board or its circuits.
Send your Gerber or CorelDRAW files and get a clear quotation.
